[C64SC]
JAMAction=1 ### Set action on CPU JAM: (0: Ask, 1: continue, 2: Monitor, 3: Reset, 4: Power cycle, 5: Quit Emulator)
Speed=100 ### Limit emulation speed to specified value
InitialWarpMode=0 ### No description
KeymapUserSymFile="sdl_sym.vkm" ### Specify name of symbolic keymap file
KeymapUserPosFile="sdl_pos.vkm" ### Specify name of positional keymap file
KeyboardMapping=0 ### Specify host keyboard layout
KeyboardType=0 ### Specify emulated keyboard type
VirtualDevice1=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice2=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice4=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice5=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice6=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice7=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice8=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice9=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice10=0 ### Enable general mechanisms for fast disk/tape emulation
VirtualDevice11=0 ### Enable general mechanisms for fast disk/tape emulation
ChargenName="chargen-901225-01.bin" ### Specify name of character generator ROM image
KernalName="kernal-901227-03.bin" ### Specify name of Kernal ROM image
BasicName="basic-901226-01.bin" ### Specify name of BASIC ROM image
MachinePowerFrequency=50 ### Use 50Hz Power-grid frequency
BoardType=0 ### No description
IECReset=0 ### Computer reset goes to IEC bus (0 = No, 1 = Yes)
CIA1Model=1 ### Set CIA 1 model (0 = old 6526, 1 = new 8521)
CIA2Model=1 ### Set CIA 2 model (0 = old 6526, 1 = new 8521)
KernalRev=-1 ### No description
Sid2AddressStart=56832 ### Specify base address for 2nd SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
Sid3AddressStart=57088 ### Specify base address for 3rd SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
Sid4AddressStart=57216 ### Specify base address for 4th SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
Sid5AddressStart=56960 ### Specify base address for 5th SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
Sid6AddressStart=57152 ### Specify base address for 6th SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
Sid7AddressStart=56896 ### Specify base address for 7th SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
Sid8AddressStart=57280 ### Specify base address for 8th SID. (0xD420/0xD440/0xD460/0xD480/0xD4A0/0xD4C0/0xD4E0/0xD500/0xD520/0xD540/0xD560/0xD580/0xD5A0/0xD5C0/0xD5E0/0xD600/0xD620/0xD640/0xD660/0xD680/0xD6A0/0xD6C0/0xD6E0/0xD700/0xD720/0xD740/0xD760/0xD780/0xD7A0/0xD7C0/0xD7E0/0xDE00/0xDE20/0xDE40/0xDE60/0xDE80/0xDEA0/0xDEC0/0xDEE0/0xDF00/0xDF20/0xDF40/0xDF60/0xDF80/0xDFA0/0xDFC0/0xDFE0)
BurstMod=0 ### Burst modification (0 = None, 1 = CIA1, 2 = CIA2)
MemoryHack=0 ### Set the 'memory expansion hack' device (0: None, 1: C64 256K, 2: +60K, 3: +256K)
PLUS60Kfilename="" ### Specify name of PLUS60K image
PLUS60Kbase=53504 ### Base address of the PLUS60K expansion. (0xD040/0xD100)
PLUS256Kfilename="" ### Specify name of PLUS256K image
C64_256Kfilename="" ### Specify name of 256K image
C64_256Kbase=57216 ### Base address of the 256K expansion. (0xDE00/0xDE80/0xDF00/0xDF80)
VICIIVideoCache=0 ### Enable the video cache
VICIIPALScanLineShade=750 ### Amount of scan line shading for the CRT emulation
VICIIPALDelaylineType=0 ### Set type of delay line used in the CRT (0: normal, 1: U only (1084 style)).
VICIIModel=0 ### Set VIC-II model (6569/6569r1/8565/6567/8562/6567r56a/6572)
VICIICheckSsColl=1 ### Enable sprite-sprite collision registers
VICIICheckSbColl=1 ### Enable sprite-background collision registers
VICIIVSPBug=0 ### Enable VSP bug emulation
SidResidEnableRawOutput=0 ### Enable writing raw reSID output to resid.raw, 16bit little endian data (WARNING: 1MiB per second).
SidStereo=0 ### amount of extra SID chips. (0..3)
SidFilters=1 ### Emulate SID filters
UserportDevice=0 ### Set userport device (0: None, 1: Userport printer, 2: Userport RS232/Modem, 3: CGA userport joy adapter, 4: PET userport joy adapter, 5: Hummer userport joy adapter, 6: OEM userport joy adapter, 7: HIT userport joy adapter, 8: KingSoft userport joy adapter, 9: StarByte userport joy adapter, 10: Synergy userport joy adapter, 11: WOJ userport joy adapter, 12: Userport DAC, 13: Userport DigiMAX, 14: Userport 4bit sampler, 15: Userport 8bit stereo sampler, 16: Userport RTC (RTC58321A), 17: Userport RTC (DS1307), 18: Userport Petscii SNES pad, 19: Userport SuperPad64, 21: Userport parallel drive cable, 22: Userport I/O Simulation, 24: Joystick Adapter (Spaceballs), 25: Userport Stupid Pet Tricks joystick adapter)
RsUserUP9600=0 ### Enable UP9600 interface emulation.
RsUserBaud=2400 ### Set the baud rate of the RS232 userport emulation.
RsUserDev=0 ### Specify VICE RS232 device for userport
RsUserRTSInv=0 ### Invert RS232 userport emulation RTS line
RsUserCTSInv=0 ### Invert RS232 userport emulation CTS line
RsUserDSRInv=0 ### Invert RS232 userport emulation DSR line
RsUserDCDInv=0 ### Invert RS232 userport emulation DCD line
RsUserDTRInv=0 ### Invert RS232 userport emulation DTR line
RsUserRIInv=0 ### Invert RS232 userport emulation RI line
IECDevice4=0 ### Enable IEC device emulation for device #4
IECDevice5=0 ### Enable IEC device emulation for device #5
IECDevice6=0 ### Enable IEC device emulation for device #6
IECDevice7=0 ### Enable IEC device emulation for device #7
IECDevice8=0 ### Enable IEC device emulation for device #8
IECDevice9=0 ### Enable IEC device emulation for device #9
IECDevice10=0 ### Enable IEC device emulation for device #10
IECDevice11=0 ### Enable IEC device emulation for device #11
PrinterTextDevice1="vice_printer.txt" ### Specify name of printer text device or dump file
PrinterTextDevice2="|lpr" ### Specify name of printer text device or dump file
PrinterTextDevice3="|petlp -F PS|lpr" ### Specify name of printer text device or dump file
PrinterUserportTextDevice=0 ### Specify printer text output device for userport printer
Printer4TextDevice=0 ### Specify printer text output device for printer #4
Printer5TextDevice=0 ### Specify printer text output device for printer #5
Printer6TextDevice=0 ### Specify printer text output device for printer #6
Printer4Output="graphics" ### Specify name of output device for device #4. (graphics, text)
Printer5Output="text" ### Specify name of output device for device #5. (graphics, text)
Printer6Output="graphics" ### Specify name of output device for device #6. (graphics, text)
Printer4Driver= ### Specify name of printer driver for device #4. (ascii/raw/mps801/mps802/mps803/220/4032/8023/nl10)
Printer5Driver="ascii" ### Specify name of printer driver for device #5. (ascii/raw/mps801/mps802/mps803/220/4032/8023/nl10)
Printer6Driver="raw" ### Specify name of printer driver for device #6. (1520/raw)
Printer4=0 ### Set device type for device #4 (0: None, 1: Filesystem, 2: Real)
Printer5=0 ### Set device type for device #5 (0: None, 1: Filesystem, 2: Real)
Printer6=0 ### Set device type for device #6 (0: None, 1: Filesystem, 2: Real)
Printer7=0 ### Set device type for device #7 (0: None, 2: Real)
PrinterUserportDriver="ascii" ### Specify name of printer driver for the userport printer. (ascii/nl10/raw)
PrinterUserportOutput="text" ### Specify name of output device for the userport printer. (graphics, text)
BBRTCSave=0 ### Enable saving of the BBRTC data when changed.
JoyOpposite=0 ### Enable opposite joystick directions
JoyStick1AutoFire=0 ### Enable autofire for joystick/joypad in native joystick port 1
JoyStick1AutoFireMode=0 ### Set autofire mode for joystick/joypad in native joystick port 1 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick1AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in native joystick port 1 (amount of fire button presses per second)
JoyStick2AutoFire=0 ### Enable autofire for joystick/joypad in native joystick port 2
JoyStick2AutoFireMode=0 ### Set autofire mode for joystick/joypad in native joystick port 2 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick2AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in native joystick port 2 (amount of fire button presses per second)
JoyStick3AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 1
JoyStick3AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 1 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick3AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 1 (amount of fire button presses per second)
JoyStick4AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 2
JoyStick4AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 2 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick4AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 2 (amount of fire button presses per second)
JoyStick5AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 3
JoyStick5AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 3 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick5AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 3 (amount of fire button presses per second)
JoyStick6AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 4
JoyStick6AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 4 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick6AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 4 (amount of fire button presses per second)
JoyStick7AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 5
JoyStick7AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 5 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick7AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 5 (amount of fire button presses per second)
JoyStick8AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 6
JoyStick8AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 6 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick8AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 6 (amount of fire button presses per second)
JoyStick9AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 7
JoyStick9AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 7 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick9AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 7 (amount of fire button presses per second)
JoyStick10AutoFire=0 ### Enable autofire for joystick/joypad in joystick adapter port 8
JoyStick10AutoFireMode=0 ### Set autofire mode for joystick/joypad in joystick adapter port 8 (0: Autofire when fire button is pressed, 1: Permanently autofire (pressing fire overrides autofire)
JoyStick10AutoFireSpeed=10 ### Set autofire speed for joystick/joypad in joystick adapter port 8 (amount of fire button presses per second)
FliplistName="/run/media/deck/SD512/Emulation/bios/vice/fliplist-C64.vfl" ### Specify name of the flip list file image
AttachDevice8d0Readonly=0 ### Attach disk image for drive #8:0 read only
AttachDevice9d0Readonly=0 ### Attach disk image for drive #9:0 read only
AttachDevice10d0Readonly=0 ### Attach disk image for drive #10:0 read only
AttachDevice11d0Readonly=0 ### Attach disk image for drive #11:0 read only
AttachDevice8d1Readonly=0 ### Attach disk image for drive #8:1 read only
AttachDevice9d1Readonly=0 ### Attach disk image for drive #9:1 read only
AttachDevice10d1Readonly=0 ### Attach disk image for drive #10:1 read only
AttachDevice11d1Readonly=0 ### Attach disk image for drive #11:1 read only
FileSystemDevice8=1 ### Set device type for device #8 (0: None, 1: Filesystem, 2: OpenCBM)
FileSystemDevice9=1 ### Set device type for device #9 (0: None, 1: Filesystem, 2: OpenCBM)
FileSystemDevice10=1 ### Set device type for device #10 (0: None, 1: Filesystem, 2: OpenCBM)
FileSystemDevice11=1 ### Set device type for device #11 (0: None, 1: Filesystem, 2: OpenCBM)
FSDevice8Dir="." ### Use <name> as directory for file system device #8
FSDevice9Dir="." ### Use <name> as directory for file system device #9
FSDevice10Dir="." ### Use <name> as directory for file system device #10
FSDevice11Dir="." ### Use <name> as directory for file system device #11
FSDevice8ConvertP00=1 ### Enable on-read support for P00 files on drive 8
FSDevice9ConvertP00=1 ### Enable on-read support for P00 files on drive 9
FSDevice10ConvertP00=1 ### Enable on-read support for P00 files on drive 10
FSDevice11ConvertP00=1 ### Enable on-read support for P00 files on drive 11
FSDevice8SaveP00=0 ### Enable saving of P00 files on drive 8
FSDevice9SaveP00=0 ### Enable saving of P00 files on drive 9
FSDevice10SaveP00=0 ### Enable saving of P00 files on drive 10
FSDevice11SaveP00=0 ### Enable saving of P00 files on drive 11
FSDevice8HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 8
FSDevice9HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 9
FSDevice10HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 10
FSDevice11HideCBMFiles=0 ### Hide CBM files (only show P00 files) for drive 11
FSDeviceLongNames=0 ### Allow filenames longer than 16 characters
FSDeviceOverwrite=0 ### Overwrite files without using SAVE"@0:name"
KbdbufDelay=0 ### Set additional keyboard buffer delay (0: use default)
AutostartPrgDiskImage="/run/media/deck/SD512/Emulation/bios/vice/autostart-C64.d64" ### Set disk image for autostart of PRG files
AutostartBasicLoad=0 ### On autostart from disk, load to BASIC start (without ',1')
AutostartTapeBasicLoad=1 ### On autostart from tape, load to BASIC start (without ',1')
AutostartRunWithColon=1 ### On autostart, use the 'RUN' command with a colon, i.e., 'RUN:'
AutostartHandleTrueDriveEmulation=0 ### Handle True Drive Emulation on autostart
AutostartDelay=0 ### Set initial autostart delay (0: use default)
SmartMouseRTCSave=0 ### Enable saving of smart mouse RTC data when changed.
TapePort1Device=1 ### No description
DatasetteResetWithCPU=1 ### No description
DatasetteZeroGapDelay=2500 ### No description
DatasetteSpeedTuning=0 ### No description
DatasetteTapeWobbleFrequency=3000 ### No description
DatasetteTapeWobbleAmplitude=500 ### No description
DatasetteTapeAzimuthError=0 ### No description
DatasetteSound=0 ### No description
DatasetteSoundVolume=1024 ### No description
CPClockF83Save=0 ### No description
TapecartUpdateTCRT=1 ### No description
TapecartOptimizeTCRT=1 ### No description
TapecartLogLevel=0 ### No description
TapecartTCRTFilename= ### No description
GlueLogic=1 ### No description
UserportRTC58321aSave=0 ### No description
UserportRTCDS1307Save=0 ### No description
IOCollisionHandling=0 ### No description
CartridgeReset=1 ### No description
CartridgeType=-1 ### No description
MMC64BIOSfilename="" ### No description
MMC64imagefilename="" ### No description
MMC64=0 ### No description
MMC64_RO=0 ### No description
MMC64_flashjumper=0 ### No description
MMC64_revision=0 ### No description
MMC64_bios_write=0 ### No description
MMC64_sd_type=0 ### No description
MMC64ClockPort=0 ### No description
MagicVoiceImage="" ### No description
MagicVoiceCartridgeEnabled=0 ### No description
IEEE488Image="" ### No description
IEEE488=0 ### No description
RAMLINKBIOSfilename="" ### No description
RAMLINKfilename="" ### No description
RAMLINKImageWrite=0 ### No description
RAMLINKsize=16 ### No description
RAMLINKmode=1 ### No description
RAMLINKRTCSave=0 ### No description
RAMLINK=0 ### No description
IEEEFlash64Image="" ### No description
IEEEFlash64Dev8=0 ### No description
IEEEFlash64Dev910=0 ### No description
IEEEFlash64Dev4=0 ### No description
IEEEFlash64=0 ### No description
Expertfilename="" ### No description
ExpertCartridgeEnabled=0 ### No description
ExpertCartridgeMode=1 ### No description
ExpertImageWrite=0 ### No description
DQBBfilename="" ### No description
DQBB=0 ### No description
DQBBImageWrite=0 ### No description
Isepicfilename="" ### No description
IsepicCartridgeEnabled=0 ### No description
IsepicSwitch=0 ### No description
IsepicImageWrite=0 ### No description
RAMCARTfilename="" ### No description
RAMCART=0 ### No description
RAMCART_RO=0 ### No description
RAMCARTsize=128 ### No description
RAMCARTImageWrite=0 ### No description
DIGIMAX=0 ### No description
DIGIMAXbase=56832 ### No description
DS12C887RTC=0 ### No description
DS12C887RTCbase=56832 ### No description
DS12C887RTCRunMode=1 ### No description
DS12C887RTCSave=0 ### No description
GEORAMfilename="" ### No description
GEORAMsize=512 ### No description
GEORAMImageWrite=0 ### No description
GEORAM=0 ### No description
REUfilename="" ### No description
REUImageWrite=0 ### No description
SFXSoundSampler=0 ### No description
EasyFlashJumper=0 ### No description
EasyFlashOptimizeCRT=1 ### No description
GMod2EEPROMImage="" ### No description
GMod2FlashWrite=0 ### No description
GMod2EEPROMRW=1 ### No description
GMod3FlashWrite=1 ### No description
IDE64Image1="ide.cfa" ### No description
IDE64Image2="" ### No description
IDE64Image3="" ### No description
IDE64Image4="" ### No description
IDE64Cylinders1=256 ### No description
IDE64Cylinders2=256 ### No description
IDE64Cylinders3=256 ### No description
IDE64Cylinders4=256 ### No description
IDE64Heads1=4 ### No description
IDE64Heads2=4 ### No description
IDE64Heads3=4 ### No description
IDE64Heads4=4 ### No description
IDE64Sectors1=16 ### No description
IDE64Sectors2=16 ### No description
IDE64Sectors3=16 ### No description
IDE64Sectors4=16 ### No description
IDE64AutodetectSize1=1 ### No description
IDE64AutodetectSize2=1 ### No description
IDE64AutodetectSize3=1 ### No description
IDE64AutodetectSize4=1 ### No description
IDE64version=1 ### No description
IDE64RTCSave=0 ### No description
IDE64ClockPort=0 ### No description
SBDIGIMAX=0 ### No description
SBDIGIMAXbase=56896 ### No description
LTKimage0="" ### No description
LTKimage1="" ### No description
LTKimage2="" ### No description
LTKimage3="" ### No description
LTKimage4="" ### No description
LTKimage5="" ### No description
LTKimage6="" ### No description
LTKserial="87000000" ### No description
LTKport=0 ### No description
LTKio=1 ### No description
MMCRCardImage="" ### No description
MMCREEPROMImage="" ### No description
MMCRRescueMode=0 ### No description
MMCRImageWrite=0 ### No description
MMCRCardRW=1 ### No description
MMCRSDType=0 ### No description
MMCREEPROMRW=1 ### No description
MMCRClockPort=0 ### No description
RRFlashJumper=0 ### No description
RRBankJumper=0 ### No description
RRBiosWrite=0 ### No description
RRrevision=0 ### No description
RRClockPort=0 ### No description
RRFfilename="" ### No description
RRFImageWrite=0 ### No description
RGCDrevision=0 ### No description
SSRamExpansion=0 ### No description
CartridgeFile="" ### No description
Drive8RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive8ExtendImagePolicy=1 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive8IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive8RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive8WobbleFrequency=75 ### Set drive wobble frequency
Drive8WobbleAmplitude=200 ### Set drive wobble amplitude
Drive8TrueEmulation=1 ### Enable hardware-level emulation of disk drive
Drive9RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive9ExtendImagePolicy=1 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive9IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive9RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive9WobbleFrequency=75 ### Set drive wobble frequency
Drive9WobbleAmplitude=200 ### Set drive wobble amplitude
Drive9TrueEmulation=1 ### Enable hardware-level emulation of disk drive
Drive10RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive10ExtendImagePolicy=1 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive10IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive10RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive10WobbleFrequency=75 ### Set drive wobble frequency
Drive10WobbleAmplitude=200 ### Set drive wobble amplitude
Drive10TrueEmulation=1 ### Enable hardware-level emulation of disk drive
Drive11RTCSave=0 ### Enable saving of FD2000/4000 RTC data when changed.
Drive11ExtendImagePolicy=1 ### Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
Drive11IdleMethod=0 ### Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
Drive11RPM=30000 ### Set drive rpm (30000 = 300rpm)
Drive11WobbleFrequency=75 ### Set drive wobble frequency
Drive11WobbleAmplitude=200 ### Set drive wobble amplitude
Drive11TrueEmulation=1 ### Enable hardware-level emulation of disk drive
Drive8RAM2000=0 ### Enable 8KiB RAM expansion at $2000-$3FFF
Drive8RAM4000=0 ### Enable 8KiB RAM expansion at $4000-$5FFF
Drive8RAM6000=0 ### Enable 8KiB RAM expansion at $6000-$7FFF
Drive8RAM8000=0 ### Enable 8KiB RAM expansion at $8000-$9FFF
Drive8RAMA000=0 ### Enable 8KiB RAM expansion at $A000-$BFFF
Drive8FixedSize="8G" ### Fixed Disk Size
Drive9RAM2000=0 ### Enable 8KiB RAM expansion at $2000-$3FFF
Drive9RAM4000=0 ### Enable 8KiB RAM expansion at $4000-$5FFF
Drive9RAM6000=0 ### Enable 8KiB RAM expansion at $6000-$7FFF
Drive9RAM8000=0 ### Enable 8KiB RAM expansion at $8000-$9FFF
Drive9RAMA000=0 ### Enable 8KiB RAM expansion at $A000-$BFFF
Drive9FixedSize="8G" ### Fixed Disk Size
Drive10RAM2000=0 ### Enable 8KiB RAM expansion at $2000-$3FFF
Drive10RAM4000=0 ### Enable 8KiB RAM expansion at $4000-$5FFF
Drive10RAM6000=0 ### Enable 8KiB RAM expansion at $6000-$7FFF
Drive10RAM8000=0 ### Enable 8KiB RAM expansion at $8000-$9FFF
Drive10RAMA000=0 ### Enable 8KiB RAM expansion at $A000-$BFFF
Drive10FixedSize="8G" ### Fixed Disk Size
Drive11RAM2000=0 ### Enable 8KiB RAM expansion at $2000-$3FFF
Drive11RAM4000=0 ### Enable 8KiB RAM expansion at $4000-$5FFF
Drive11RAM6000=0 ### Enable 8KiB RAM expansion at $6000-$7FFF
Drive11RAM8000=0 ### Enable 8KiB RAM expansion at $8000-$9FFF
Drive11RAMA000=0 ### Enable 8KiB RAM expansion at $A000-$BFFF
Drive11FixedSize="8G" ### Fixed Disk Size
DosName1540="dos1540-325302+3-01.bin" ### Specify name of 1540 DOS ROM image
DosName1541="dos1541-325302-01+901229-05.bin" ### Specify name of 1541 DOS ROM image
DosName1541ii="dos1541ii-251968-03.bin" ### Specify name of 1541-II DOS ROM image
DosName1570="dos1570-315090-01.bin" ### Specify name of 1570 DOS ROM image
DosName1571="dos1571-310654-05.bin" ### Specify name of 1571 DOS ROM image
DosName1581="dos1581-318045-02.bin" ### Specify name of 1581 DOS ROM image
DosName2000="dos2000-cs-33cc6f.bin" ### Specify name of 2000 DOS ROM image
DosName4000="dos4000-fd-350022.bin" ### Specify name of 4000 DOS ROM image
DosNameCMDHD="bootromCMDHD-v2-80.bin" ### Specify name of CMD HD Boot ROM image
Drive8ParallelCable=0 ### Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
Drive8ProfDOS=0 ### Enable Professional DOS
Drive8SuperCard=0 ### Enable Supercard+
Drive8StarDos=0 ### Enable StarDOS
Drive9ParallelCable=0 ### Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
Drive9ProfDOS=0 ### Enable Professional DOS
Drive9SuperCard=0 ### Enable Supercard+
Drive9StarDos=0 ### Enable StarDOS
Drive10ParallelCable=0 ### Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
Drive10ProfDOS=0 ### Enable Professional DOS
Drive10SuperCard=0 ### Enable Supercard+
Drive10StarDos=0 ### No description
Drive11ParallelCable=0 ### No description
Drive11ProfDOS=0 ### No description
Drive11SuperCard=0 ### No description
Drive11StarDos=0 ### No description
DriveProfDOS1571Name="" ### No description
DriveSuperCardName="" ### No description
DriveStarDosName="" ### No description
DosName2031="dos2031-901484-03+05.bin" ### No description
DosName2040="dos2040-901468-06+07.bin" ### No description
DosName3040="dos3040-901468-11-13.bin" ### No description
DosName4040="dos4040-901468-14-16.bin" ### No description
DosName1001="dos1001-901887+8-01.bin" ### No description
DosName9000="dos9000-300516+7-revC.bin" ### No description
Drive9Type=0 ### Set drive type (0: no drive, 1540: CBM 1540, 1541: CBM 1541, 1542: CBM 1541-II, 1570: CBM 1570, 1571: CBM 1571, 1581: CBM 1581, 2000: CMD FD-2000, 4000: CMD FD-4000, 4844: CMD HD, 2031: CBM 2031, 2040: CBM 2040, 3040: CBM 3040, 4040: CBM 4040, 1001: CBM 1001, 8050: CBM 8050, 8250: CBM 8250, 9000: CBM D9090/D9060)
Drive10Type=0 ### Set drive type (0: no drive, 1540: CBM 1540, 1541: CBM 1541, 1542: CBM 1541-II, 1570: CBM 1570, 1571: CBM 1571, 1581: CBM 1581, 2000: CMD FD-2000, 4000: CMD FD-4000, 4844: CMD HD, 2031: CBM 2031, 2040: CBM 2040, 3040: CBM 3040, 4040: CBM 4040, 1001: CBM 1001, 8050: CBM 8050, 8250: CBM 8250, 9000: CBM D9090/D9060)
Drive11Type=0 ### Set drive type (0: no drive, 1540: CBM 1540, 1541: CBM 1541, 1542: CBM 1541-II, 1570: CBM 1570, 1571: CBM 1571, 1581: CBM 1581, 2000: CMD FD-2000, 4000: CMD FD-4000, 4844: CMD HD, 2031: CBM 2031, 2040: CBM 2040, 3040: CBM 3040, 4040: CBM 4040, 1001: CBM 1001, 8050: CBM 8050, 8250: CBM 8250, 9000: CBM D9090/D9060)
RAMInitValueOffset=2 ### No description
RAMInitStartValue=0 ### No description
RAMInitValueInvert=4 ### No description
RAMInitPatternInvert=16384 ### No description
RAMInitPatternInvertValue=255 ### No description
RAMInitStartRandom=0 ### No description
RAMInitRepeatRandom=0 ### No description
RAMInitRandomChance=10 ### No description

